
Original: $22,282.00
-70%$22,282.00
$6,684.60The Story
The practical advantages of the patented microphone clamp on the TG D58 condenser microphone are immediately apparent whether when using with rack toms, snare drums or percussion instruments: the microphone can be mounted and positioned quickly and securely.
The balanced frequency response also makes it immediately ready for use. Pre-amplifiers are a thing of the past due to the integrated pre-amplifiers with downward-facing standard XLR connections. Its ability to operate at high levels compared to the previous model Opus 88 should also be mentioned, as is the newly designed, low-resonance housing, the elastic capsule suspension, the improved signal-to-noise ratio and technical values that remain valid even with phantom powering below 44 volts.
Sound Channeling Technology:
- Optimally positioned treble resonator for optimised high-frequency reproduction
- 2nd treble resonator within the system
- Special sound holes for a frequencyindependent polar pattern
Features:
- Short, flexible gooseneck with horizontal swivel joint for optimum positioning
- Rugged construction with rubber shock-mounted microphone capsule
- Patented microphone clamp with integrated pre-amp and XLR connection
- No disturbing cable between microphone head and pre-amp
- Cardioid polar pattern for high-gain-before feedback
- Wide transmission range
- Phantom powering 11 - 52 V
- Transducer type: Condenser (back electret)
- Operating principle: Pressure gradient
- Polar pattern: Cardioid
- Frequency response
- Close miking: 20 - 20,000 Hz
- Distant miking (measured at 1 m): 35 - 20,000 Hz
- Open circuit voltage: 5 mV/Pa (-46 dBV) ±2.5 dB
- Nominal impedance: 200 Ω
- Load impedance: ≥ 1 kΩ
- Max. SPL
- at 24 V and 48 V phantom power: 140 dB
- S/N ratio: 59 dB [CCIR; Q-Peak], 70 dB [A; RMS]
- Equivalent SPL: 35 dB [CCIR; Q-Peak], 24 dB [A; RMS]
- Power supply: Phantom power: 12 - 48 V (recommended: 48 V)
- Power consumption: 4.7 mA
- Connection : 3-pin XLR, male
- Dimensions
- Clamp (W x H): 85 x 118 mm
- Gooseneck length: 20 mm
- Weight: Approx. 140 g

Details & Craftsmanship
Every detail has been carefully considered to bring you the perfect product.
Description
The practical advantages of the patented microphone clamp on the TG D58 condenser microphone are immediately apparent whether when using with rack toms, snare drums or percussion instruments: the microphone can be mounted and positioned quickly and securely.
The balanced frequency response also makes it immediately ready for use. Pre-amplifiers are a thing of the past due to the integrated pre-amplifiers with downward-facing standard XLR connections. Its ability to operate at high levels compared to the previous model Opus 88 should also be mentioned, as is the newly designed, low-resonance housing, the elastic capsule suspension, the improved signal-to-noise ratio and technical values that remain valid even with phantom powering below 44 volts.
Sound Channeling Technology:
- Optimally positioned treble resonator for optimised high-frequency reproduction
- 2nd treble resonator within the system
- Special sound holes for a frequencyindependent polar pattern
Features:
- Short, flexible gooseneck with horizontal swivel joint for optimum positioning
- Rugged construction with rubber shock-mounted microphone capsule
- Patented microphone clamp with integrated pre-amp and XLR connection
- No disturbing cable between microphone head and pre-amp
- Cardioid polar pattern for high-gain-before feedback
- Wide transmission range
- Phantom powering 11 - 52 V
- Transducer type: Condenser (back electret)
- Operating principle: Pressure gradient
- Polar pattern: Cardioid
- Frequency response
- Close miking: 20 - 20,000 Hz
- Distant miking (measured at 1 m): 35 - 20,000 Hz
- Open circuit voltage: 5 mV/Pa (-46 dBV) ±2.5 dB
- Nominal impedance: 200 Ω
- Load impedance: ≥ 1 kΩ
- Max. SPL
- at 24 V and 48 V phantom power: 140 dB
- S/N ratio: 59 dB [CCIR; Q-Peak], 70 dB [A; RMS]
- Equivalent SPL: 35 dB [CCIR; Q-Peak], 24 dB [A; RMS]
- Power supply: Phantom power: 12 - 48 V (recommended: 48 V)
- Power consumption: 4.7 mA
- Connection : 3-pin XLR, male
- Dimensions
- Clamp (W x H): 85 x 118 mm
- Gooseneck length: 20 mm
- Weight: Approx. 140 g













